Practical Basic Seminar
"Double-lock standing seam technology.
Basic knots and connections. "
For starters, there is no pre-preparation required for the basic seminar. This level of the seminar takes into account the lack of professional training of the trainees. The practical seminar "Double-lock standing seam technology. Basic Assemblies and Connections" will allow students to gain basic knowledge and work out the most important skills of the profession of a tinsmith.
The knowledge gained at the seminar is enough for you to easily make a roof of medium complexity using double seam technology.
The program of the seminar and the entire educational course for the profession of a roofer-tinsmith was developed on the basis of widely used methods of work using Double-lock standing seam technology. and the author's own methodology.
The author's teaching methodology is based on combining in a single professional approach to the formation of details and their combination of methods based on:
- manual formation of coating nodes;
- forming knots using templates and
- the formation of knots using patterns of parts made in advance from paper.
Classes are held in a workshop on special layouts using professional roofing tools and machines.
You do not need to bring an instrument with you to participate in the seminar.
The uniform is free, comfortable for the listener.
At the end of the practical seminar, students receive a certificate from our school. It is not a government document. We do not conduct exams and do not assign qualification ranks.
Seminar program
The program of the practical seminar "Double-lock standing seam technology. Basic knots and connections"
(points of the main tasks are listed and it is possible to analyze additional tasks)
- theoretical foundations of the formation of a roof covering using the double-lock standing seam technology..
- formation of blanks of coating details and ordinary coating patterns using hand tools and on machine tools.
- formation of the inner corner of the coating detail at the junction with vertical surfaces.
- formation of the end of the seam seam on the roof eaves (radius and beveled options).
- the formation of the "Manchester" end of the seam seam on the ridge and at the junction with vertical surfaces.
- formation of the inner corner of the coating detail with a seam seam.
- formation of a radial transition of a double fold to a vertical surface (with an open fold).
-
formation of a direct transition of a double fold to a vertical surface.
-
installation (sealing) of a round pipe on the surface of the roofing part. Pipe rivet. (additionally, as the main task is completed).
-
production of a pipe apron with direct eyeliners of folds along the bottom manually (in place).
-
the use of templates in the manufacture of a pipe apron and the "Swedish" method of forming a pipe apron. (additionally, as the main task is completed).
-
formation of a node for connecting parts of the valley along the top of the ridge. Reduction of valleys.
-
the formation of the intersection of the ridge and costal sutures on the hip.
-
production of a pipe apron with diagonal seams in the lower part using "closed folds". One-way ramping device behind the pipe.
-
formation of a roof window flashing using the double seam technology without the use of a factory-made flashing. (as the main task is completed).
-
execution of the node "to choose" at the request of the listeners (their majority) is also subject to the fulfillment of the main task of the seminar, which was announced above.
